Accessories

height 220 – 295 mm, 2 types of spring holders, tilting, turning, tightening mechanism, stable design, non-slip

AC 230 V / 50 Hz / DC 32 V / 4,75 A

monitoring of all functions of amplifiers and throughput caross 100 V routes, alholder switching contact

button for shaft dia. 6 mm, cover 66 × 66 mm, compatible with ABB Tango, plate steel bracket

4 and 3 wire NUC. listening, 10 W, 11 positions, a total shutdown, only electronics

4 and 3 wire NUC. listening, 10 W, 11 positions, a total shutdown, design ABB Tango, the entire controller

30 W / 8 Ω, mono, for low impedance systems

30 W / 8 Ω, mono, for low impedance systems, with cover, design ABB Tango

30 W / 8 Ω, stereo, for low impedance systems

30 W / 8 Ω, stereo, for low impedance systems, with cover, design ABB Tango

4 wire, 100 W, 11 positions, only electronics

4 wire, 100 W, 11 positions, the entire controller, design ABB Tango

4 wire, 30 W, 11 positions, the entire controller, design ABB Tango

for assembly dia. and PRT controllers, from 1 to 10 W to 6×100 W controll, 483 × 88 × 3 mm, buttons separately

digital encrypted transmission on the 2.4 GHz in WiFi band, stereo, 24 b / 48 kHz A/D converter, operation range 50 m, configurable 1/1 and 1/8, easy pairing, standby mode, variable, high quality sound, very low noise

digital encrypted transmission on the 2.4 GHz in WiFi band, stereo, 24 b / 48 kHz D/A converter, operation range 50 m, configurable 1/1 and 1/8, easy pairing, standby mode, variable, high quality sound, very low noise

digital audio transmission via UTP cable, stereo, 24 b / 48 kHz D/A and A/D converter, separate transmission outside LAN / WAN network, point to point, maximum connection length 500 m, high sound quality, very low noise (S/N ratio 105 dB) and low latency

digital audio signal transmission via optical cable (fiber singlemode SM), full duplex (one signal there and the other back), stereo, 24 b / 48 kHz D/A and A/D converters, separate transmission outside the LAN / WAN network, point to point , max. connection length 20 km, quality sound, very low noise (S/N ratio108 dB) and low latency 0.5 ms

galvanic isolation, 50 kΩ / 600 Ω, ground disconnect, adjustable attenuation, for the signal path

both balanced and unbalanced outputs, galvanic insulation, mode – levels switch

isolation transformer, for line signal level, galvanic isolation, stereo, RCA connectors

2× reception of IR signal from remote control and its transmission to 3 devices via cable via 3 transmitting LEDs, universal version for common IR remote controls, power supply by adaptor

HDMI input, output 1× stereo audio RCA + 1× CVBS composite video, PAL / NTSC mode switch, support for resolution up to 1920 × 1080

digital S/PDIF input – coaxial + optical TOS-Link, output 1× stereo audio RCA 1× headphone Jack 3.5, support for sampling up to 192 kHz / 24 b