Accessories

both balanced and unbalanced outputs, galvanic insulation, mode – levels switch

isolation transformer, for line signal level, galvanic isolation, stereo, RCA connectors

HDMI input, output 1× stereo audio RCA + 1× CVBS composite video, PAL / NTSC mode switch, support for resolution up to 1920 × 1080. Napojte se na HDMI zařízení!

digital S/PDIF input – coaxial + optical TOS-Link, output 1× stereo audio RCA 1× headphone Jack 3.5, support for sampling up to 192 kHz / 24 b. Napojte ozvučení na TV!

10 W, colors wire pins

120 W, colors wire pins

25 W, colors wire pins, we recommend PT 300 #1 as an excellent replacement

different powers 6 to 30 W, different wire outputs, with or without a switch, from disassembly from loudspeakers

80 W, solder tips, high quality core with lowest distortion

measurement with AC 50 V rms. / 330 Hz signal, ranges 20 – 200 – 20 000 Ohms, LCD display with backlight, measuring accuracy + – 2%, continuous or single measurement, Data Hold. Pomocník pro vaši práci!

electret microphone, electrodynamic stereo headphones, 30 – 20 000 / 50 – 15 000 Hz, flexible frame, goose-neck customizable microphone, wind protection and foam sleeves. Konečně volné ruce!

TWS, charging box, microphone, large headphone capsule dia. 13 mm, excellent sound with low distortion, Czech audio menu, functions for audio playback, calling and game mode with low delay, operating time up to 7 h, automatic charging in the box, elegant design

contains of 1× annulus, 2× transom, galvanized steel sheet thickness 1.5 mm

against speaker mechanical excision from mineral ceiling plate, 590 × 590 mm, thickness 3 mm, MDF

against speaker mechanical excision from mineral ceiling plate, 590 × 590 mm, thickness 3 mm, MDF

against speaker mechanical excision from mineral ceiling plate, 590 × 590 mm, thickness 3 mm, MDF

for the installation RP 110×110, DTD, the external according to speaker, without surfacing

special cable for 100 V line speaker systems, 2 × 1.5 mm², CCA copper, twisted core wires, low capacity. První spešl kabel pro 100V rozvody!

special cable for 100 V line speaker systems, 2 × 2.5 mm², CCA copper, twisted core wires, low nominal resistance

double shielding Mylar + foil + braiding, higher resistance to interferences, transmission speed up to 1 Gb/s, compatible with PoE, PoE+, RS 232, RS 485, for RJ45 connectors, well flexible, durable

metal, spray color RAL 9005, for magnetic mounting on speaker, dia. 248 mm

metal, spray color RAL 9005, for magnetic mounting on speaker, 251 × 251 mm

metal, spray color RAL 9005, for magnetic mounting on speaker, dia. 282 mm

steel construction, round rods dia. 4 and 11 mm, mesh grid 50 × 50 mm, 373 × 523 × 426 mm. Ochrana proti sportu i vandalům!